Rack ExtensionsAUv3 (Mac)AUv3 (iOS)VSTContact
Become a Patron!

Comp 609 (iOS)

Comp 609 (iOS)

This is exactly how a compressor should sound on a Master or Bus channel. Sounds very analogue and real. Smooths the peaks and retains the transients. Keeps my mix open. Adds glue to the mix. RRS are for sure the “Waves plugins” of the iOS platform. Well done to the devs.stormbeats (forum.audiobus.us)

British Equalizer Model B v1.0.0
British Equalizer Model B
Reason Studios Shop

British Equalizer Model B based on the highly regarded British console of the seventies, this sought-after equaliser can now be enjoyed by today’s Reason Studios DAW engineers in a RE plug-in format. 

British Equalizer Model B accurately reproduces the classic warm tones, presence and punch of the British console equalisers that are extremely popular with today’s studio engineers.

Preamp section

POLARITY

Invert On/Off Selector — Click the button «PHASE» to enable (lit) or disable (unlit) polarity inversion of the input signal.

HARMONICS

Rotate the DRIVE knob to set the desired amount of harmonic distortion mixed into the singal.

EQ Section

HIGH (SHELF)
  • Gain — Rotate the knob to set the desired gain of the high shelf filter between -15 dB and +15 dB;
  • Frequency Switch — Click the button «HI» to toggle between 8 kHz (lit) and 12 kHz (unlit) high shelf corner frequencies.
HIGH MID (PEAK)
  • Gain — Rotate the knob to set the desired gain of the high mid filter between -15 dB and +15 dB;
  • Frequency — Rotate the knob to set the desired high mid center frequency between 1 kHz and 15 kHz.
LOW MID (PEAK)
  • Gain — Rotate the knob to set the desired gain of the low mid filter between -15 dB and +15 dB;
  • Frequency — Rotate the knob to set the desired low mid center frequency between 100 Hz and 1.5 kHz.
LOW (SHELF)
  • Gain — Rotate the knob to set the desired gain of the low shelf filter between -15 dB and +15 dB;
  • Frequency Switch — Click the button «LO» to toggle between 60 Hz (lit) and 120 Hz (unlit) low shelf corner frequencies.

HIGH PASS FILTER (50 Hz)

On/Off Switch — Click the button to activate (lit) or deactivate (unlit) the 50 Hz high pass filter.

EQ IN

On/Off Switch — Click the button to activate (lit) or deactivate (unlit) the EQ section. When the EQ section is off, the PreAmp section remains active.

EQ MODE

Allows you to choose between Equalizer Modes (Stereo, Mid, Side).

OUTPUT LEVEL

Rotate the OUTPUT LEVEL knob to set the desired gain of the output signal between -24 dB and +24 dB.